What is Infiltrator Water Technologies’ specification for minimum and maximum system cover? Infiltrator Water Technologies recommends a minimum of 12 inches of compacted cover over the chambers.
How do you size an infiltrator septic system?
Each chamber is 12 square feet of base area and 8 square feet of sidewall area. For instance: 2 bedroom home may be calculated locally as 2 x 200 = 400 x 1.5 = 600 gallons per day usage.
What is a low profile chamber septic system?
The Arc 36 Low Profile (LP) septic leaching chamber is a sturdy, lightweight plastic unit that combines maximized infiltrative surface area and storage capacity with an improved structural design to accommodate most conventional leachfield system challenges without sacrificing performance.
How far does a septic tank have to be from the house in Michigan?
Minimum Isolation Distances
| Item | Septic Tank | Drainfield |
|---|---|---|
| Building Foundation (no basement) | 5 feet | 10 feet |
| Basement Wall | 10 feet | 15 feet |
| Water Supply Well* (25 feet deep or more) | 50 feet | 100 feet |
| Lake or Stream | 25 feet | 50 feet |
How do Infiltrator chambers work?
The chambers are buried, locked end-to-end and capped with dome-shaped end plates to create a large half-tube structure. Effluent from a septic tank flows freely into the chambers and is filtered efficiently into the soil absorption area.
How long is infiltrator?
Infiltrator Systems VS Traditional Stone & Pipe Systems A 12-foot length of Infiltrator chamber trench has a more effective infiltrative area than a 25-foot length of stone and pipe trench. Only a backhoe and pickup truck needed.
How much do infiltrators cost?
INFILTRATOR CHAMBERS
| PART NO. | PRICE | DESCRIPTION |
|---|---|---|
| Infiltrator Chamber | $25.00 | 22W x 48L x 12H |
| Infiltrator EndCap | $14.00 | End Cap |
What is an infiltrator septic system?
Infiltrator products are scientifically designed to provide more efficient wastewater treatment by optimizing the soil’s inherent treatment capabilities. Onsite systems provide a passive, reliable means of wastewater treatment at a relatively low cost, while preserving environmental quality.
What is the quick4 plus™ standard low profile (LP)?
The Quick4 Plus™ Standard Low Profile (LP) offers maximum strength through its four center structural columns. This chamber can be installed in a 36″ wide trench. It is shorter in height than Infiltrator’s other Standard model chambers, allowing for shallow installation.
Does infiltrator water technologies offer shallow cover?
Infiltrator Water Technologies does offer a line of Shallow Cover (SC) Chambers that allow for six inches of cover with an H-10 equivalent loading rate, however these are only available in specific markets. Always check with your local health codes for specific cover requirements.
What are the different sizes of infiltrator chambers?
Infiltrator manufactures chambers in different sizes and styles to meet all regulatory and site requirements. Chambers are 12″ high and can be installed in 36″ wide trenches. Chambers are 14″ high and can be installed in 36″ wide trenches. Chambers are 8″ high and can be installed in 36″ wide trenches.
How wide of a trench can The Infiltrator be installed?
This chamber can be installed in a 36″ wide trench. It is shorter in height than Infiltrator’s other Standard model chambers, allowing for shallow installation.
