Docker Alteroo

Home / updates

How do I adjust my Oki printer?

William Harris |

Other Setup Menu

  1. Press the scroll button to select the setup menu on which you want to change a setting and then press the «ENTER» button.
  2. Press the scroll button or to change the setting.
  3. Press the «ENTER» button.
  4. Press the «ON LINE» button to exit the menu mode.

How do I align my Okidata printer?

On the receipt printer, follow these steps:

  1. Press the Park Key.
  2. Press the Quiet Key twice.
  3. Press the Load Key.
  4. Press and hold the Tear Key to see where it will print.
  5. To adjust, while sill holding the Tear Key down, press and hold the Shift Key.
  6. Release all keys.
  7. To test follow step 4 again.

How do you set tear off on Okidata 320?

To change the Forms Tear-Off setting: 1 Press SEL (1) + SHIFT (2). 3 Press ITEM (4) until Form Tear-Off appears in the second column. 4 Press SET (5) until the time interval you wish to select appears in the third column.

How do I set up my Okidata 320 Turbo?

Check the Okidata 320 Turbo Printer Settings

  1. Insert a blank sheet of paper in the printer.
  2. Enable the printer’s Menu Mode by pressing and holding the Shift and Sel buttons at the same time.
  3. Set the printer’s Emulation Mode to “IBM PPR”.
  4. Set the Bottom Margin to “Invalid”.
  5. Set the Paper Out Override setting to “Yes”.

How do I change font size on Oki printer?

  1. Open the file to print.
  2. Select [Print] from the [File] menu.
  3. Click [Preferences].
  4. Select the [Extend] tab.
  5. Click [Fonts].
  6. Select the [Font Substitution] check box in [TrueType Font Output Type].
  7. Specify the printer font to use instead of TrueType fonts in [Font Substitution Table].
  8. Click [OK].

How do I reset my Okidata Microline 320?

Okidata Microline Reset Factory Settings

  1. Turn The Printer Off, Then.
  2. Hold Down The SEL and SHIFT buttons while you turn the printer on.
  3. All Settings Will Now Be Reset To The Original Factory Settings Including TOF Alignment. Home. Printer Menus.

How do I find the IP address for my Oki printer?

You can find the IP address on the Network Information page, refer to “Configuration settings” on page 6. The printer Web Page is displayed.

How do I change the top of form on Okidata 320?

What is “Top of Form” (TOF) and how do I set it?

  1. Press the ‘PARK’ button to park the paper.
  2. Press the ‘FF/LOAD’ button to load the paper.
  3. If the printer is ON line, press the ‘SEL’ button to take the printer OFF line.
  4. Press and hold the ‘SHIFT’ button, then:
  5. Press the ‘SEL’ button to place the printer back ON line.

How do I reset my OKI Microline 320 Turbo?

How do I load paper into an OKI printer?

Loading Paper

  1. Pull the paper cassette out.
  2. Set the paper size dial (1) to match the loading paper size.
  3. Slide the paper guide to the width of paper to be loaded.
  4. Slide the paper stopper to the length of paper to be loaded.
  5. Fan a stack of paper well, and then align the edges of the paper.

How do you reset an OKI printer?

To reset the printer:

  1. Press and release the SEL key to take the printer off-line. The SEL light will be out.
  2. Then, press and hold the SHIFT key and press the RESET (CHARACTER PITCH) key.
  3. The printer is reset.

You Might Also Like