How do I change my name on my NEC dt700 phone?

Changing the name on an NEC phone Print

1. Press the Speaker key on your phone.
2. Dial 700.
3. Dial your extension number.
4. Use the keypad to enter the name in standard text entry mode. # = Space. Feature = Back space. Hold = Enter. Speaker = Cancel.

How do I connect my Plantronics headset to my NEC phone?

Steps to use a corded headset on NEC phones

1. Use setting #7 on smart cord (see video for details)
2. Enable Headset Mode within the phone menu options.
3. Press the “speaker” button to answer/disconnect calls with the corded headset.
4. Note: Enabling headset mode will disable the usage of Speakerphone with some NEC phones.

How do I setup my NEC phone greeting?

NEC Business Phone System – How to Change Active Voicemail Greeting

1. Call your mailbox by pressing the VMsg soft key.
2. Enter security code.
3. Voicemail options will display on screen, select “Greeting” by pressing 4 or press the “Greet” soft key.

How do I set up voicemail on my NEC phone?

How do I set up my Voicemail on my NEC SV8300 telephone?

1. Press Message or Voicemail button (You can also dial 6000)
2. Enter Default Security Code- 0327.
3. Listen and follow instructions.
4. State First and Last Name.
5. Press * when complete.
6. Would you like to change it?

How do I change my caller ID on my NEC phone?

Programming Steps

1. Go to Program 15-01: Extension Basic Setup.
2. Select the desired IP extension number from the ICM Extension Dropdown Menu.
3. Click the checkbox next to 04-ISDN Caller ID.
4. Go to Program 21-19: IP Trunk (SIP) Calling Party Number Setup for Extensions.

How do I use the PC port on my dt700?

PC port is enabled on the phone. Insert the LAN cable into PC connector on the back of the phone, until you hear a click. 2-30 DT700 User Manual… The directory card can be used to record often dialed numbers or other important information. Directory cards are available as options. Remove the protective sheet from the cover.

How do I connect my dt700 headset to my phone?

You can also press the Cancel Soft Key to exit without making any changes. 3-40 DT700 User Manual… Connect the headset to the phone: Insert the headset cord plug into the HEADSET connector on the back of the phone, until you hear a click. Thread the cord through the groove, as shown in the figure below. 3-41 DT700 User Manual…

What are the firmware versions of the dt700 and dt730g?

•DT700 phone firmware version NEC Std SIP 2.3.x and later •DT730G phone firmware version NEC Std SIP 3.x and later •3C Unified Communication System 8.1.3.7 and later 610-210r8 December 2013 Revisions for: •3C Unified Communication System 8.5.3 and later viP/N 610-210r8 DT700 Phone User Guide

How do I connect my dt700 to power over Ethernet (PoE)?

Phone LAN Straight Groove Cable If you have not connected the DT700 phone to a PoE jack, connect the AC/DC adapter to the phone as shown below to supply power to the Power Over Ethernet phone. 2-29 DT700 User Manual… PC port is enabled on the phone.