Procedure
- Start or restart the HP server.
- At boot time, press F8 to enter the Integrated Lights-Out 2 setup.
- Provide credentials at the login prompt.
- Press Ctrl+S to open the Intel Boot Agent Setup Menu.
- Press F8 to open the ROM Array Configuration menu.
- From the Main Menu, select Create Logical Drive and press Enter.
Which utility automatically configures the system without any intervention during the post process when you start up a server for the first time?
the ORCA utility
During the power-up sequence, the system ROM automatically configures the entire system without needing any intervention. During this process, the ORCA utility, in most cases, automatically configures the array to a default setting based on the number of drives connected to the server.
How do I check RAID status on HP ProLiant server?
To check the status of an HP RAID you need to use hpacucli (as root). If this isn’t installed, you can install it using apt-get install hpacucli ia32-libs on Debian/Ubuntu systems.
How do I find my RAID server settings?
How to Guide: Checking if a RAID is configured
- Rick click on the “computer” icon on the desktop.
- Select Manage.
- Expand Storage.
- Click Disk Management.
- In the bottom center pane you’ll see different Disk numbers.
- Under the Disk number you’ll see either Basic or Dynamic.
How do I find RAID configuration in CMD?
Checking RAID from command line
- Go to System Settings.
- Click CLI Console.
- Type the command diagnose system raid status and press Enter.
- The following information is shown in the output: Mega RAID – this output shows that the device uses hardware RAID. Software RAID – this output shows that the device uses software RAID.
Does HP ProLiant dl380p gen8 support UEFI?
There is no UEFI mode on this server model.
How do I check my RAID status?
To view the RAID status, go to System Settings > RAID Management. The RAID Management pane displays the RAID level, status, and disk space usage. It also shows the status, size, and model of each disk in the RAID array.
How do I check my RAID configuration?
How do I access HP Smart array?
During the initial boot:
- To modify the server configuration ROM default settings, press the F9 key in the ProLiant POSTscreen to enter the UEFI System Utilities screen.
- If you do not need to modify the server configuration and are ready to install the system software,press the F10 key to access Intelligent Provisioning.
What is an array configuration?
An array is an ordered configuration, or group, of physical devices (disk drive or flash drive modules) that is used to define logical volumes or devices. An array is a type of MDisk that is made up of disk drives; these drives are members of the array.
How to create raid in hp dl380 G8 server?
First off all we have to reboot our HP DL380 G8 server and we have to check console windows. Then we can get F8 option on console windows where we have to press F8 to goto RAID configuration option windows. Like below. Once we have pressed F8 key then we can get RAID creation option windows.
Is it possible to disable raid on a Gen8 controller?
05-08-2018 11:49 AM 05-08-2018 11:49 AM i can see at esxi configuration. Gen8 ‘P’ series controllers are RAID only. You cannot disable RAID. No support by private messages. Please ask the forum!
How to create logical drive using raid in Windows 10?
We can select or unselect disk with press space bar key. Once we have selected disk and RAID option, then we can press enter to create logical drive. Now we have to press F8 to save our RAID configuration.
