The first step is to turn your Samsung washer off for a few minutes before turning it back on. Often the 4E error code will resolve itself by simply turning the power off and on, as this resets your washer.
How do I fix E4 on my washing machine?
When the washing machine shows error E4, the washing machine doesn’t get water or too little water to run the program. First, check whether the faucet is open properly. If it’s open, check the water supply. The inlet hose may be clogged or kinked.
How do I reset my Samsung washing machine error code?
What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.
What does E4 mean on a washing machine?
Water supply error
What does the error code means and how to fix it?
| New Code | Old Code | Cause |
|---|---|---|
| E4 | E1 | Water supply error. The appliance is not detecting that the unit is filling with water. |
| 4E1 4E2 | 4Ed | Water temperature issue |
| 5E | E2 | |
| 6E | Water heater not functioning |
What does c4 mean on a Samsung washer?
4C or 4E is an error code which indicates that your washing machine has detected an issue with the water supply. This could mean that your Samsung washing machine is not able to generate a supply of water due to a blocked or kinked water supply hose.
How do I fix error code 4E?
4E (4C) ERROR
- 1 Check that the water tap connected to the washing machine is open to full.
- 2 Check that there are no kinks or bents in the water hose connected to the machine.
- 3 Check to see if the water hose mesh filter is not blocked.
- 1 Turn off the water source to the washing machine.
How do I fix E04 error on my washing machine?
The E04 error code appears at the end of the washing cycle, during the operation of the drain pump. It means that the device can’t remove all the foam from the drum. You can eliminate the e04 error code by cleaning the drain pump in the Bosch Nexxt 500 series washer.
What does UC mean in Samsung washing machine?
Samsung Washing Machine Error Codes
| Error Code | Cause |
|---|---|
| UC | Excessuve Fluctuation In The Supply Voltage (voltage has fluctuated outside 176-286vAC) |
| UE, E4 | Unbalanced Error (the washing load in the drum is unbalanced i.e. clothes may have got trapped inside a large towel and resting on one side of the drum) |
What does 4e mean on Samsung washer?
Samsung washing machine Not filling in allocated time error code 4E and E1 Fault. This is essentially a fill timeout error which will normally mean that either the water isn’t on or that an inlet valve has failed or pressure switch problem check pipes as well.
What does error code Ur mean on a Samsung washer?
Samsung washing machines can display an error code 5E. This means the washing machine has a “water drain error”. It’s basically timed out on empty, it’s tried draining out the water for 10 minutes and the water level still hasn’t fallen below a specified level (or at least it thinks it hasn’t).
How to use Samsung washing machine?
Sort laundry by color and fabric type. Remove everything from the pockets, and zip up any zippers.
