Reset Waste Ink Pad Counter for Epson L110, L210, L130, L300, L350, L355, and more
- Download the Utility (here). Use WinRar to extract the file.
- Double-click exe to run the utility.
- On the next screen, click the button titled Particular adjustment mode.
- A list of options will appear.
- Another screen will appear.
What do I do if my Epson ink pad is at the end of its service life?
This message is a warning that certain parts have reached the end of their usable life and that your printer will no longer work until it is serviced. If you want to continue using the printer, Epson recommends having the printer serviced at an Epson Authorized Customer Care Center.
How do I reset the ink on my Epson L110 printer?
Use ink on printing devices L110/210/300/550/355 even easier. If you have ended one or another color while printing, the printer will displays a message that is out of ink.To reset the printer, you just simply enough to hold the button for 3 seconds and the printer will give you the opportunity to print on.
How do you reset the waste ink pad on an Epson L355?
To reset the L355 ink pad counter, click in the Main pad counter check box to select it and then click on the Initialization button. Thus would start the process of resetting the ink pad counter to zero. The process should be instant and you should immediately see a dialog box popping up.
How do I fix Epson L1800 ink pad is at the end of its service life error?
Printer repair for the error the ink pad is at the end of its service life is carried out in two stages. Starting with replacing or cleaning the ink pad, followed by resetting the waste ink pad counter. After these two steps have been completed, the printer will return to normal and can be used again.
How do you reset the waste ink pad on an Epson l805?
Select ‘Waste ink pad counter’ and then click ‘OK’. In this window, click on ‘Main pad counter’ and ‘Platen pad counter’ checkboxes and then click ‘Initialize’. In this pop-up window click ‘OK’ to start initializing waste pads. Once initializing is done, click ‘Finish’ and close the program.
