Press and hold the volume + and volume – buttons for 4 seconds. The speaker will announce “DUO mode pairing” . Power on the second speaker. Press and hold the volume + and volume – buttons for 4 seconds.
How do you clear a paired list on a BlueAnt Q2?
Follow these steps to clear the Q2 pair list.
- With the power ON…
- Press the VOLUME UP, VOLUME DOWN and the MULTI-SELECT BUTTON.
- The unit will reset, the pairings will be gone and you can re-connect and continue using your headset.
How do you reset a BlueAnt speaker?
How do I reset the X1?
- With the X1 speaker off please press and hold the power button.
- The start up sound will sound and the led will flash.
- Keep holding the power button until you see the battery indicator lights turn off.
- After the battery indicator lights have turned off the X1 will restart and say “Bluetooth”.
How do I pair my Supertooth 2?
Pairing Mode. Turn on its Bluetooth function then execute a Bluetooth search so that it will be able to search and find your Supertooth II. When the phone displays the list of the Bluetooth devices it has found, select the name of this kit (Supertooth II). 5. When the phone asks for a passcode, enter “0000”.
How do I reset my BlueAnt air pump?
Take the Left Pump Air 2 and place it in your ear, press and hold the button until the ear bud says “powering down” and let go of the button. Now press and hold the button again until the ear bud says “Pair me” then left go of the button. The light should be flashing blue rapidly.
Why does the blueant Bluetooth device say the pair list is full?
The BlueAnt Bluetooth device has limited space for storing pairing information, which means that if you connect the device to too many phones, you may run out of room for additional pairing data. When this occurs, you hear the message “The Pair List Is Full” spoken in your ear.
How do I Pair my Bluetooth blueant Q2 to my new iPhone 5?
How do I pair my Bluetooth BlueAnt Q2 to my new iphone 5? 1 Turn on BA 2 Click Vol +, Vol – and the MFB together. Just quickly press and release all three buttons at the same time (do not hold down the buttons) 3 The Q2 will announce that it has been reset. 4 Then try to connect it with the iPhone 5.
How do I reset the blueant?
For the reason that blueAnt was used with the another iPhone first troubleshooting step will be to reset the BlueAnt. Please follow the steps below: 1. Turn on BA 2. Click Vol +, Vol – and the MFB together. Just quickly press and release all three buttons at the same time (do not hold down the buttons) 3.
Where are the volume and multi-function buttons on the blueant?
The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list.
