How do I reset my Brother HL 2140 toner?

Brother HL-2140 – Reset Toner Cartridge

1. Ensure the printer is turned off.
2. Open the printer front cover.
3. Hold the Go button while turning the printer on.
4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
5. Press the Go button two (2) times.

How do I fix the toner error on my Brother printer?

1. Open the front cover of the printer.
2. Press the Clear / Back button.
3. Press the * button.
4. Press the 0 button.
5. Press the 0 button.
6. Close the front cover.
7. This will clear the ‘Toner Low’ error and allow for continuous printing.

How do you reset the toner on a Brother printer?

Reset process

1. Switch-off the printer.
2. Press and hold the on/off button.
3. When all the LEDs turn on, open the cover and remove the toner cartridge + drum unit.
4. Release the on/off button.
5. Re-install the toner cartridge + drum unit back into the printer and close the printer cover.

How do you fix a paper jam on a Brother HL 2140 printer?

Clear paper jams.

1. Open the front cover and leave the machine for at least 10 minutes to cool down.
2. Slowly take out the drum unit and toner cartridge assembly.
3. Close the front cover.
4. Pull the paper tray completely out of the machine.
5. Use both hands to slowly pull out the jammed paper.

How do I bypass the toner light on a Brother printer?

To reset the ‘Toner Life End’/’Replace Toner’ message on Brother MFC monochrome (black and white) printers:

1. Open the door and press the Clear/Back key.
2. Press *00.
3. Press OK.
4. Do not choose anything for drum replacement. When the drum replacement menu comes up, press * and then 00, then press OK.

Why is my printer saying no toner when there is?

The No Toner message appears if the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine.

How do you reset a Samsung toner cartridge?

So the best way to let your printer detect the ink from your Samsung toner cartridges is to reset the No Toner message. The way to do this is to first press the Menu button on your printer’s digital keyboard then press the number key. After you press the number key, then continuously press the 1,9,3, and 4 buttons.

How do I bypass the toner on a Brother printer?

1. Power on the Brother printer.
2. Open the toner access door located at the front of the printer.
3. Press the “Clear/Back” button.
4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
5. Press the “1” button to reset the toner cartridge display.

Why does my Brother printer keep jamming?

You may be putting too much paper into the paper tray. It should never be overfilled as it can often cause a jam. Also, make sure the paper fits the tray and that it’s inserted correctly. Because the wrong size or incorrectly positioned paper can get stuck in the printer.

How do I fix Brother HL 2140 toner life end error?

Brother HL 2140 Toner Life End Error Hack 1 Remove Drum and Toner Assembly. Remove the front access panel to access the drum and toner assembly. 2 Bypassing the Toner Sensors. Now that the toner cartridge is removed, pick it up and look for the glass window on the sides. 3 Test Run. 4 Resetting the Printer. 5 Status Page.

How do I know if my printer is out of toner?

If the toner light disappears then success, if you print and it’s blank, then you are out of toner. It’s good idea to print a status page to see all the statistics regarding your printer. To print this page, turn on the printer and press the blue button three times. The status page will then print.

How do I replace the toner in my Philips printer?

1. Remove the front access panel to access the drum and toner assembly. 2. Remove drum assembly by pulling on the drum handle. 3. Once the drum assembly is removed, press on the green tab (left) and lift the handle (grey) on the toner cartridge. 1. Now that the toner cartridge is removed, pick it up and look for the glass window on the sides.