The example provided in this section are taken from Windows Server 2008 R2. 1. Using the Control Panel double-click on the MPIO applet to open up the MPIO Properties dialog box. Note: The MPIO applet can also be started from Start > Run mpiocpl . 2.
Does Windows Server 2016 support multi-path input-output (MPIO)?
Windows Server supports multi-path input-output (MPIO) starting from Windows Server 2008 R2. By default, Windows Server disables MPIO module. There are two ways to install it in Windows Server 2016:
How to enable MPIO using Server Manager?
Enable MPIO Using Server Manager 1 Open the Server Manager 2 Find and check the Multipath I/O in the Features list 3 Finish MPIO installation and restart the server More
How do I add a new device to the MPIO applet?
Using the Control Panel double-click on the MPIO applet to open up the MPIO Properties dialog box. Note: The MPIO applet can also be started from Start > Run mpiocpl . 2. Click Add to add a new device entry. Pay close attention to the instructions in the dialog box for string formatting.
Does MPIO for Fibre Channel (FC) work on Windows Server 2008 R2?
4. MPIO for Fibre Channel (FC) on the Windows Server is completed. These steps work for Windows Server 2008 and 2008 R2 (Service Pack 1). The example provided in this section are taken from Windows Server 2008 R2. 1.
How do I open the MPIO properties dialog box?
Once and iSCSI connection has been established use the Control Panel double-click on the MPIO applet to open up the MPIO Properties dialog box. Note: The MPIO applet can also be started from Start > Run mpiocpl .
How do I add iSCSI devices to my multi-paths MPIO properties?
2. Click the Discover Multi-paths MPIO Properties dialog and select Discover Mulit-Paths. After selecting the tab you will see PURE FlashArray listed. Click Add support for iSCSI devices. 2. Click the MPIO Devices tab to add a new device entry. Click Add to add a new device entry.
