In UEFI or BIOS, find SATA settings to select the mode for memory devices. Switch them to AHCI, save settings and restart the computer. After the restart, Windows will start installation of SATA drivers, and when it is over, it will ask you for another restart. Do it, and AHCI mode in Windows will be enabled.
How do I enable AHCI on Windows 8 and install Windows 10 after installation?
Enable AHCI using Safe Mode
- Enable Safe Mode with Safe boot (Minimal), and restart the computer when prompted. (
- Boot the computer to your BIOS or UEFI firmware settings.
- In your BIOS or UEFI firmware settings, enable AHCI, and save & exit to apply and restart the computer. (
How do I change from ATA to AHCI?
Restart the computer and boot to the system BIOS. Change the ATA Drive setting from ATA Mode to AHCI Mode, press enter to accept the change. Click Yes to the Warning about the detected mode change on the embedded ATA controller. The system will boot normally to the Modern App Start Menu in SafeMode.
How do I get an AHCI driver?
Right-click the Windows Start Menu once more. Choose Command Prompt (Admin). Type this command and press ENTER: bcdedit /deletevalue {current} safeboot (ALT: bcdedit /deletevalue safeboot) Reboot once more and Windows will automatically start with AHCI drivers enabled.
How do I know if AHCI is enabled?
Click the arrow next to “IDE ATA/ATAPI Controllers” to display the list of controller drivers currently used by your system. d. Check for an entry that contains the acronym “AHCI.” If an entry exists, and there is no yellow exclamation mark or red “X” over it, then AHCI mode is properly enabled.
How do I go back to AHCI?
Here’s how.
- Right-click the Windows Start Menu.
- Type this command and press ENTER: bcdedit /set {current} safeboot minimal.
- Restart the computer and enter BIOS Setup (the key to press varies between systems).
- Change the SATA Operation mode to AHCI from either IDE or RAID (again, the language varies).
How do I check AHCI mode?
How do I boot Windows in AHCI mode?
Can I switch from IDE to AHCI?
There is in fact a way to switch operation from either IDE / RAID to AHCI within Windows 10 without having to reinstall. Change the SATA Operation mode to AHCI from either IDE or RAID. Save changes and exit Setup and Windows will automatically boot to Safe Mode. Right-click the Windows Start Menu once more.
How do I change my AHCI driver?
Right-click the Windows Start Menu. Choose Command Prompt (Admin). Restart the computer and enter BIOS Setup (the key to press varies between systems). Change the SATA Operation mode to AHCI from either IDE or RAID (again, the language varies).
How do I enable AHCI mode in Windows 10?
It is quite possible that AHCI mode is already enabled in your PC. It can be checked in several ways: If there is a device containing “AHCI” in its name as in our case, it means that AHCI mode is used in this computer. Go to BIOS or UEFI. Find an item with the name «Storage options», «SATA Mode», «SATA Emulation» or anything similar.
How do I change the ATA drive to AHCI mode?
In search, write cmd, right click it and run it in administrator mode. Restart the computer and boot to the system BIOS. This is normally done by pressing the delete key during system boot. Update the ATA Drive setting in the BIOS from ATA Mode to AHCI Mode. Save the setting and restart your computer to boot into Windows.
What is the difference between AHCI and IDE mode?
That is, if you connect a disk with Windows XP to the system with AHCI-enabled controllers, you will run into a BSOD error (“the blue screen of death”). On the other hand, any SATA disk can work in IDE mode. Without kowing it, many users will feel no difference.
Should I set my Disk Controller as AHCI?
Therefore, if you’ve upgraded your disk or just installed an SSD then the disk controller should be set as AHCI. In Windows 8 and 8.1;/10 this needs to manually activated from the Registry Settings and BIOS.
