Remove the HDD cover on the left side of the PS3. You will need to unscrew a blue screw that is very easy to strip, so be careful when unscrewing it. Pull the hard drive straight out once you remove the screw. While you are looking at this side, remove the sticker towards the top of the case to reveal a Torx screw.
How do you take the cover off a PlayStation 3?
Lift the top cover from its rear edge and rotate it toward the front of the PS3. Remove the top cover. There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit front the rear of the machine with a spudger to release the rear right of the casing.
What screwdriver Do you need to open a PS3?
Torx Screwdriver
Use the Torx Screwdriver (T8 or T10) to remove the torx screw from the space behind the rubber foot. This screw has a security bit but most are able to remove it successfully with a normal Torx driver.
What screwdriver Do you need to open a ps3?
Is PS3 fat or slim better?
A key improvement with the PS3 slim is the improved power consumption due to the 45nm cell processor. The PS3 slim consumes at about half the rate of the original PS3. … And because the PS3 is cooler, it doesn’t need to be cooled to much with fans; resulting in less noise. Another change is the bigger hard drive.
What is the blue screw on the bottom of my PS3?
Turn the Slim PS3 over so we can expose the screws under the rubber feet. The larger red rectangle is the blue screw securing the 120GB hard drive.
How do you remove the outer shell of a PS3?
Locate the two locking tabs on the back of the PS3. Push them in simultaneously and lift the outer plastic shell off of the main board but BE CAREFUL as there is a ribbon cable connecting the shell to other hardware. Ribbon cables are very fragile.
How to open and tear down a PlayStation 3?
How To: Open and Tear-Down a Playstation 3 Console. What Tools Are Need: First Step: Remove the screw from the side of the console and the warranty sticker. This is done with the small flat head screwdriver. Remove 7 Screws from top of console shell, and then pull upward. With enough force the shell of the console pop’s loose.
How do I remove the front cover of a PS3?
Place your palm on the PlayStation 3 logo and slide the plastic front cover towards you and off of the outer plastic shell. Set it aside. Remove the metal receiver that held the torx screw you just removed.
How do I open the case of a PS3?
You can use an antistatic wrist strap to keep yourself grounded, or touch a screw on an active light switch. Remove the hard drive. Before you open the case, you will need to remove the hard drive. Luckily, the hard drive on the PS3 is fairly simple to remove.
