Backing up a Brocade switch
- Establish a putty session to the switch and login as normal.
- Enter the command configupload.
- At the protocol selection prompt choose the protocol appropriate for you FTP server.
- At the IP Address prompt enter the IP address of the FTP server Server Name or IP Address [host]: 10.10.10.5.
How do I save my configuration on my Brocade switch?
Answer. Use WinSCP to download the file or use the FTP get sub command to move the file from the switch to the FTP server. You will need the root password for the Brocade switch to get the file you need. ftp> Guest login ok, access restrictions apply.
How do I reset my Brocade switch?
In the CommandCentral Storage Console, display the Switches Summary (Managing > SAN > Switches.) In the table, click the name of the Brocade switch whose configuration you want to restore. In the drop-down list in the switch’s Overview pane, click Restore Switch Configuration and click Go.
What is ISL in Brocade SAN switch?
For Brocade switches on which the Inter-Switch Links (ISL) are configured using FC ports, you must configure the switch ports on each switch fabric that connect the ISL. These ISL ports are also known as E-ports. – All of the ISLs in an FC switch fabric must be configured with the same speed and distance.
How do I add a port to a VLAN on a Brocade switch?
Configuring VLANs
- To create a VLAN, use the vlan command.
- To add a port to that VLAN, so that traffic across that port is tagged for the specified VLAN, use the tagged ethernet command.
- To add a range of ports to a VLAN, use the tagged ethernet to command.
How do I collect Cmcne Supportsave?
Collecting Switch SupportSaves using Connectrix Manager Converged Network Edition (CMCNE): Select Monitor > Technical Support > Product/Host SupportSave.
How do I check my Brocade switch firmware?
The command used to display the FOS version in a Brocade switch or director is “firmwareshow”. It shows the firmware versions on both the primary and secondary partitions of the storage device.
How do I backup my Brocade FC switch?
Backing up a Brocade switch. Before doing any kind of changes to a Brocade FC switch it’s a good idea to backup its config first. We backup Brocade switches using the configupload command. Prerequisites – The switches need an FTP server to backup to. You will need to know the IP address of the FTP server and a user account with access to proceed.
How do I assign an IP address to the Brocade ICX switches?
Antaira UTS-1110A single-port USB to RS-232] serial adapter. Photo by Antaira. By default, the Brocade ICX switches do not have an IP address assigned. The easiest way to configure an IP address is to log into the PDU over a serial port. Most servers still come with a built-in 9-pin serial port, but most desktops and laptops do not.
How to upload a switch configuration to a FTP server?
To use the interactive mode to upload a config from a switch named switch1 to an ftp server with the IP address 1.2.3.4, configUpload can be run to walk you through backing up the configuration: After the configuration is uploaded, you will have a text file with you switches configuration on the remove server:
What makes Brocade so successful?
One thing that has led to Brocade’s success is their robust CLI, which allow you to view and modify almost every aspect of their switch. This includes zoning configurations, SNMP attributes, domain ids, switch names and network addresses, etc.
