How do you fix selphy paper jam?

Follow these steps if paper jams in your SELPHY ES1.

1. Turn the printer OFF and unplug the machine.
2. Remove the cover below the paper-handling slot. (To do so, lay the printer down, place your fingers on the sides of the cover, and lift up).
3. Slowly remove the paper to avoid tears, then re-attach the cover.

How do you put paper in a Canon Selphy CP900?

How to insert paper (SELPHY CP900)

1. Check the paper size.
2. Open the lid.
3. Set the paper into the paper cassette that you prepared.
4. Close the until it clicks into place. Leave the open during printing.

Why is my Selphy printer not printing?

If you can’t print, check the following: Confirm that SELPHY is ON. Confirm that SELPHY is connected via Wi-Fi to the same router as the Apple device. Confirm that the paper and ink cassettes are loaded correctly.

How do you put paper in selphy?

Load paper in the cassette

1. Open the outer cover (1), and inner cover (2).
2. Load the paper in the cassette with the glossy side facing up. The paper cassette holds up to 18 sheets.
3. Close the inner cover firmly until it clicks into place. Leave the outer cover open when you print.

How do I reset my Canon Selphy CP910?

How to Reset Canon Selphy CP910

1. Power off the printer by force pressing its power button.
2. Wait until the printer turns on and settles.
3. Disconnect any cables from the printer if connected.
4. Tap the ON button for several times.

Why does my Canon Selphy says wrong paper size?

If the wrong paper size is still selected, the issue may be related to the program that you are printing from. Try printing from different software to narrow down the cause of the issue.

How do you put paper in a Canon Selphy 1300?

Solution

1. Remove the paper cassette paper from the bag, remove any protective sheets from the paper, and load all paper (18 sheets) in the paper cassette.
2. Loading 19 or more sheets may damage the printer or cause malfunction.
3. Holding the paper as shown, load it with the glossy side up.

How do you use a selphy cp900?

In such a case, use infrastructure mode.

1. Turn on SELPHY.
2. Insert an ink and paper cassette into SELPHY to prepare to print.
3. Tap MENU on the printer.
4. ​Select Wireless network Settings, then tap OK.
5. Select Initial Settings, then tap OK.
6. Check the displayed printer name, then tap OK.
7. Select Ad Hoc, then tap OK.

How do I reset my Canon Selphy printer?

Follow these steps to perform a hard reset on the printer.

1. Turn off the printer and wait for it to completely shut down.
2. Disconnect any cords from the device.
3. Press the ON or power button several times (at least 5 times is recommended).
4. Wait for 20 minutes.
5. Reconnect the power cord directly to a known working outlet.

How do I connect to selphy?

Step 3: Connect your SELPHY and Android™ smartphone

1. Turn on your Android™ smartphone.
2. Make sure your Android™ smartphone is not in airplane mode.
3. Tap the menu key on your Android™ smartphone and tap [Settings].
4. Turn the [Wi-Fi] switch ON and tap [Wi-Fi] .
5. Prepare SELPHY.
6. Access the setting screen.

How do you load paper into selphy CP1300?

Does Canon Selphy need special paper?

Always use the paper specific to SELPHY CP series printers (included in the genuine Canon brand Color Ink Cassette / Paper Set). Regular printing paper, regular postcards, or paper specified for use in SELPHY ES series printers can’t be used. Paper and ink are sold only in sets and can’t be purchased separately.