Lubricate by applying a small amount of bike oil to the cable near the cable guides and housings. Be careful not to get any lubricant on your brake pads or rotors. Bleed your brakes: If you have hydraulic disc brakes and the levers feel spongy when you squeeze them, there may be air in the hydraulics.
What fluid does Hayes brakes use?
First things first: the Hayes system uses DOT 3 or DOT 4 mechanical brake fluid.
How do you bleed the Hayes brake?
- 1 Assemble the bleed kit. Push the hose onto the nozzle of the bleed bottle.
- 2 Remove brake pads. Remove both wheels, then remove the brake pads.
- 3 Retract pistons.
- 4 Get bike into correct position.
- 5 Raise the bleed nipple.
- 6 Attach long hose at lever.
- 7 Attach bleed kit at calliper.
- 8 Add oil and release trapped air.
Should you oil disc brakes?
“If using brake cleaners make sure you use bicycle specific ones as car brake cleaners sometimes include oil to stop cast iron discs from rusting.” “We recommend a mild soap and water to clean disc brakes. This is to help avoid contamination of the pads and rotor.
How to adjust the disc brakes on a bicycle?
Hayes sole disk brake adjustment for bicycle. The goal is to have the inboard pad as close to the rotor as possible without it rubbing the disc. To adjust this one there’s a little set screw in the top of the caliper (2mm allen bolt I believe) which is sitting right above the inboard pad.
What makes Hayes bikes unique?
The technology that puts us ahead… In 1997, Hayes revolutionized the mountain bike industry with the introduction of the first hydraulic braking system. Since then, Hayes has remained committed to breakthrough design and performance.
Who is hayhayes performance systems?
Hayes Performance Systems is a global manufacturer of brakes, suspension systems, wheels and components. Our range of brands and superior products instill confidence in all kinds of riders. As parents, we set out to design a system for kids, using high-quality and high-performance components that we’re proud of.
What type of brake fluid do you use for Hayes brakes?
First things first: the Hayes system uses DOT 3 or DOT 4 mechanical brake fluid. DO NOT USE MINERAL OIL FOR THESE BRAKES!!!!!!! Second, the bleed starts from the caliper up to the brake lever. Third, wear gloves.
