Answer: the sink strainer plug measures 78mm in diameter at the top flat surface, which should snuggly fit into the plug hole, therefore your plug hole diameter should measure 78mm to fit properly. Measure your plug hole diameter by holding your measuring tape flat across the bottom of the sink.
Are all sink basket strainers the same size?
Sink plugs are still available in 1 inch, 1 1/4 inch, 1 3/8 inch, 1 5/8 inch, 1 7/8 inch, 2 inch, 2 1/4 inch, 2 3/8 inch and 2 1/2 inch. You can often use a standard plug in your basket strainer waste. Take care, sometimes the 2 inch refers to the pipe size but the actual plug measures 2 1/4 inches.
Are kitchen sink strainers a standard size?
Kitchen sink basket strainers are the same size. The basket assembly can fit the sink drain opening every time. You don’t have to measure it, you don’t have to measure the size of your sink drain hole, this is the standard in the industry.
What size are kitchen sink strainers?
A 2-inch sink strainer fits the standard bar sink drain. Drains connect to either a 1 1/4-inch or 1-1/2 inch tail pipe. These drains, like bathroom and kitchen drains, use a P-trap, which is a J-shaped pipe that connects to the main drain line.
Are plug holes a standard size?
While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard.
Are there different size sink strainers?
For nearly all kitchen sinks, the standard drain hole size is 3.5 inches, though some larger setups exist. Bar sinks have smaller drain holes sized between 1.875 (1 7/8) inches and 2.25 inches, though, again, some are larger. Sometimes strainers for bar sinks are sold under the term junior.
Are there different size sink drains?
Measure the Sink Most drain openings are 1 1/4 inches, although 1 1/2 inches and 1 5/8 inches are also common sizes.
What is a standard sink drain size?
While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard, with widths of 1.5 inches and 1.625 inches also common.
