Reset your Smart Ear Thermometer:
- Slide the battery cover down then pull it away to expose the battery compartment.
- Remove the batteries.
- Wait 10 seconds.
- Put the batteries back in, the same as they were before.
- Push the button to turn on the thermometer.
What does POS mean on a Braun ear thermometer?
position error
(POS = position error) The infrared monitor cannot find a temperature. equilibrium and allows no measurement – Clear the display by changing the probe cover. Ensure that the positioning of the probe is correct and remains stable. Ambient temperature is not within the allowed operating range 50-104 °F.
How do you calibrate an ear thermometer?
Top up the broken ice with a bottle. Give a little clean water and mix until the glass is finished. Wait about three minutes before slipping the sensor into the ice-filled water onto the thermometer. Wait 30 seconds or so and test that the thermometer reads 32-degrees Fahrenheit.
How do I unlock my Braun thermometer?
Upon expiration of the time limit, the unlocked icon and countdown timer will be replaced with the locked icon and the thermometer will beep once every 5 minutes to indicate locked state. Unlock the thermometer by returning it to the charging station.
How do I change my Braun ThermoScan to Celsius?
Answer: Apparently, you can switch back and forth between Celsius and Fahrenheit. Press start button for 8 seconds until it switches between the two settings. Your Braun ThermoScan is delivered to you with the Celsius (°C) temperature scale activated.
How do I change my Braun ear thermometer to Fahrenheit?
Press and hold down the «start» button. After about 8 seconds the display will show this sequence: «°C» / «°F» /… Release the «start» button when «°F» is shown. There will be a short beep to confirm the new setting, the thermometer then turns off automatically.
How do you fix a POS error on a thermometer?
The POS error means that the thermometer probe was not positioned correctly in the ear and an accurate reading was not possible. If this does not work, it is recommended to replace and move the lens filter again and then press Start to start a new measurement.
Why does my ear thermometer give me different readings?
Differences between measurements can also result from the following factors: The thermometer is not the same temperature as the room you are measuring in (Example: it has been in a much warmer or colder room). The thermometer is inserted into the ear canal at a different depth or angle.
How does the Braun Thermoscan work?
When the Braun ThermoScan is placed in the ear, it continuously monitors the infrared energy. The measurement is finished and the result displayed when the thermometer detects that an accurate temperature measurement has been taken. Why measure in the ear?
How do I Turn Off the Braun Thermoscan 4520 ear thermometer?
Page 7 Wait for the ready signal. Fit the probe snuggly into the ear canal, then push the «start» button. The Braun ThermoScan ear thermometer turns off automatically after 60 seconds of inactivity. The IRT 4520 can also be turned off by pressing the «I/O»…
Can you use a Braun thermometer in your ear?
4 The Braun ThermoScan thermometer has been carefully developed for ac- curate, safe and fast human body temperature measurements in the ear. The shape of the thermometer probe prevents it from being inserted too far into the ear canal which could perforate the tympanic membrane.
How do I care for my Thermoscan probe?
• The probe window must be kept clean, dry, and undamaged at all times to ensure accurate measurements. To protect the probe window, always keep the thermometer in the storage cover while transporting or when not in use. • This thermometer must only be used with genuine Braun ThermoScan probe covers (PC 800).
