To adjust your brake controller output, press and hold the vehicle brake pedal. Set the output to the starting value specified in the instructions. Then, in an open area, test the trailer brakes by driving forward at about 25 mph and applying the brakes. If the vehicle stops too slowly, increase the maximum output.
How do I adjust my brake controller agility?
To set the controller, take the trailer to an area with plenty of space like an empty parking lot. Drive at 25 miles per hour and apply the vehicle brakes aggressively. If the trailer brakes lock up, turn the power down until you get it to a point just under wheel lock up.
When should the trailer brake controller gain setting be adjusted?
The gain on your trailer brake controller must be set every time your trailer’s weight changes. The gain is what adjusts the amount of braking force that the electric brakes provide. If not set correctly, it could create a dangerous situation.
How do you use Hopkins agility brake controller?
Start with a sensitivity setting of 3 and power setting of 25 percent. Start moving at low speed, 20-25 mph, and press the foot brake aggressively. If the trailer brakes lock up, reduce the power. If it feels as though the trailer is pushing the vehicle, increase brake power.
What is boost on brake controller?
The boost button on the Tekonsha Primus IQ Electronic Brake Controller, # TK90160, is used when you might be towing a full trailer versus an empty trailer, if the electric brakes are worn or not adjusted correctly, or if you will want the trailer braking to lead the tow vehicles braking.
How do you use a trailer brake controller RAM?
Push the RIGHT arrow on the steering wheel to enter “TRAILER TOW”. Push the UP or DOWN buttons until the Trailer Brake Type appears on the screen. Push the RIGHT arrow and then push the UP or DOWN buttons until the proper Trailer Brake Type appears on the screen.
