Set up the headset
- From the sidebar, click the Calls icon.
- From the Calls panel, click the Settings icon.
- Using the appropriate connector (USB cable or USB transceiver), connect your headset to a USB port on your computer .
- When Genesys Cloud prompts you to create a device profile, click Yes.
How do I connect my Sennheiser headphones to my TV?
If your TV has built-in Bluetooth capability (please check your TV’s user manual), here’s what you do:
- Get your SENNHEISER Headphone into pairing mode (Please scroll to the bottom of the page or see your SENNHEISER user manual.)
- Go into your TV’s Bluetooth menu, search & select your SENNHEISER Headphone to connect.
Why are my Sennheiser headphones not working?
To resolve this issue an internal electronics reset is required. Disconnect the transmitter (base station) from both the audio source and the power source and at the same time remove the batteries from the headset. Leave the system disconnected from power and the batteries out of the headset for 15 minutes.
How do I connect my EPOS Sennheiser headset?
Press and hold the Power button until the LED flashes blue and red. The headset is in pairing mode. 2. Enable Bluetooth on your mobile device and start the search for Bluetooth devices – see instruction manual of your mobile device.
How do I connect my Sennheiser Bluetooth headphones to my laptop?
To start pairing your headset, make sure that you remove or unpair all other discoverable devices to avoid pairing conflicts. Visit this link: Connect to Bluetooth devices, and follow the instructions there to connect your wireless headset to your computer. Let us know if this works for you.
How do I set up headphones on my TV?
If your TV has a 3.5mm headphone jack, just plug your wired headphones into it. If your TV doesn’t have a 3.5mm jack, but has RCA stereo outputs, get an RCA-to-3.5mm adapter and use your headphones that way.
How do I reset my Sennheiser headphones?
1) Turn the headset off. 2) Connect the headset to a power supply using the charging cable. 3) Keep both the volume buttons pressed and power on the headset. The LED will flash purple three (3) times and then enter pairing mode (LED alternates flashing red/blue).
How do I use my Rs 180?
Using the RS 180 Using the RS 180 To switch the product on and to listen to your sound source, proceed as follows: Sequence of steps Page 1. Make sure that the rechargeable batteries are charged. 2. Switch your sound source on. To disconnect the transmitter from the mains: Pull out the mains plug from the wall socket.
What are the additional features of the Rs 180 headphones?
Additional features of the RS 180 headphone system • Transmits uncompressed audio over a robust 2.4 GHz digital link, enabling you to enjoy your music without the hassles of cables. • Dynamic transducer systems with powerful neodymium magnets deliver clear and detailed audio reproduction.
What precautions should I take when using Sennheiser headphones?
Keep the headphones at least 1.2” (3 cm) from cardiac pacemakers or implanted defibrillators. • Please protect your hearing from high volume levels. Sennheiser headphones also sound exceptionally good at low volumes. • Only use the Sennheiser supplied power supply units.
Can you substitute parts for Sennheiser earphones?
Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by Sennheiser or those having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
