Make sure the ExerSaucer is even and level, then twist each of the three legs a full turn clockwise. Depress the locking mechanisms on each leg. Gently but firmly press in a downward direction until the ExerSaucer has been lowered. This will cut the height of the ExerSaucer by more than half.
Where do the springs go on an ExerSaucer?
Rotate the spring dome as you press it downward into place until it locks. Align the lines around each opening with the notches on the spring domes. Lay the tray and seat upside down and insert the three springs onto the underneath of the spring domes. Put an upper leg piece over each spring and twist it into place.
How do you take the legs off an exersaucer?
Remove the toys and seat base from the tray. Uninstall the tray and leg assemblies from the base by pushing upwards to unlock the legs. Remove storage caps from the tray and unlock the tray halves and separate them. Reposition the tray halves into an S-shape, snapping one side onto the other and locking into place.
How do you put a exersaucer in a table?
Once the locking mechanism is lined up with the lever, release the lever to lock the leg in place. Wash, rinse and repeat until all four legs are locked. After locking the legs in place turn the play table over, affix the toys to the table and you’re all done.
Is an exersaucer the same as a jumper?
Exersaucers Encourage Spinning Around, Jumperoos Focus On Jumping Up & Down. Both of these movements can lead to tip toe walking as the baby is pushing off with his toes.
Can I wash the seat of the exersaucer?
Designed to entertain and enrich babies between birth and 24 months, the seats are made to detach so that they can be laundered.
How do I turn my Evenflo exersaucer into an activity table?
Do you need ExerSaucer?
ExerSaucer Time Should Be Limited All in all, ExerSaucers can be great for developing hand-eye coordination and promoting sensory and motor skills if you keep it to a minimum and keep up your interactions with your baby while they’re enjoying their short burst of ExerSaucer time.
How do I get instructions for my Evenflo product?
Please verify the date of manufacture on your product and contact Evenflo at 1-800-233-5921 to obtain the instructions created specifically for your product’s model and manufacturing year. Always read all instructions and warnings applicable to your particular product prior to first use, and keep the instructions available for future reference.
How do you set up an ExerSaucer?
Insert the seat into the ExerSaucer’s tray and press down firmly until you hear it snap into place. Test the seat to ensure it spins freely in the tray. Lay the lower base flat onto the floor. Align the leg tabs with the tabs on the base and snap the three lower legs into position.
How do you install ExerSaucer pedestals?
Install the 1- and 1/2-inch spring screws onto the pedestals. Push the pedestals through the pedestal holes on the upturned base, making sure the locking tabs are completely pushed through to keep the pedestals from popping off. Clip the ExerSaucer legs onto the pedestals of the base, making sure each clicks into place.
