Check for a bad kill switch by disconnecting the switch’s wire and checking the plug for spark. Do this by unscrewing the plug, holding it by the rubber boot and touching its threads to the engine metal while pulling the starter cord.
What year was the Stihl 009l made?
Details
| Category | Petrol Chainsaws |
|---|---|
| Release date | Mar 2008 |
Do you start a Stihl chainsaw with the brake on?
On a gas-powered Stihl chainsaw, the chain brake is located just in front of the handlebar. All you have to do to activate it is push it forward. This will keep the chain locked as a safety precaution while you are starting the chainsaw, and until you are ready to use the tool. Remove the bar cover.
How does the kill switch work on a chainsaw?
In a kill switch setup, the switch is normally not creating a circuit, which allows the engine to start and run. When you want to shut the engine off, the switch is depressed and held. This creates a circuit to ground which shuts off the engine. The ignition switch is turned on or off to control the ignition circuit.
How do you tell what year a Stihl chainsaw is?
Find the saw decal located at the bottom right where the saw’s bar meets the base of the saw. Beneath the UPC code is the serial number. Call Stihl customer support at 800-610-6677. Give the customer representative agent the serial number and they, in turn, will be able to look up the year the saw was made.
Why is my new chainsaw not starting?
Chainsaw won’t start after sitting? Stale gas is the number one reason your chainsaw won’t start after sitting idle. Empty out the old gas and try replacing it with fresh gas, if it still doesn’t start, you’ll need to clean your carburetor.
How do I know if my switch is bad?
Set the switch to the off position and touch both terminals on the side that held the wires. The tester light should not come on. Then flip the switch to the on position and touch both terminals with a probe from the tester. The switch is good if the continuity tester lights.
