The Zahm SS-60 Volume Meter was developed to determine average CO² levels of gas in tank stored beverages.
Can piercing device?
The Zahm Model D.T. Piercing Device is used to test carbonated beverages for volumes of CO² gas in glass/PET bottles and cans. This instrument uses a dual scale pressure gauge (0-60 psi & 0-4.2kg/cm2) and an adjustable 2″ dial thermometer (25/125ºF & -5/55ºC). It is available in one and three liter sizes.
How do you measure CO2 in beer?
To measure the CO2 levels before and during production, brewers use our 100% Sample Draw CO2 Meter. These meters may also be used to spot check CO2 levels inside vats before workers go inside to clean them. During bottling, CO2 gas is used to pre-fill each bottle before the beer is added.
What is a carbonation stone?
Carbonation Stone, a device used to diffuse carbon dioxide into beer. Usually used inside a brewery bright tank or a brewpub serving tank, the carbonation stone is a hollow cylinder, capped at one end, into which carbon dioxide is forced under pressure.
How do you measure CO2 in a drink?
The most common measurement technique for determining CO2 concentration in beverages is to measure the total pressure and temperature of a sample. This method, known as the P/T method, involves measuring the total pressure and temperature and then calculating the CO2 concentration in the liquid.
What is CO2 volumes?
The amount of carbon dioxide dissolved into a beer is measured in units called “volumes of CO2.” This gets a little technical, but a “volume” is the space that the CO2 would take up at a standard temperature (32° F) and pressure (one atmosphere) if removed from the beer.
How fast does a carbonation stone work?
Using a carbonation stone will cut down the time needed to carbonate the beer to about 1/2 hour. The beer needs to be cold, between 34 and 40 °F. Attach the stone so that it is at or near the bottom of the keg.
What size carbonation stone do I need?
0.5 to 3 microns
Carbonation stones are most effective from 0.5 to 3 microns. Any smaller and the stone becomes clogged too easily by proteins and organic material, any higher and the bubbles are too large and won’t dissolve into the product resulting in uneven foaming of your beer.
How do you calibrate CO2 gauges?
You connect the cylinder with the zero gas to the CO2 meter using a pressure regulator and open the feed. After a minute, the measurement is stable and the CO2 meter will indicate a concentration of 0 ppm CO2. If not, then manually set it to 0 ppm.
What is the Zahm co² gas purity tester?
The Zahm CO² Gas Purity Tester is an improved absorption bottle designed to eliminate confusing cocks, hose connections, awkward manipulation, and the usual caustic spillage. It makes gas testing simple, fool-proof, clean, and highly accurate. SKU: 10001 Categories: CO² Purity Testing, Testing Equipment.
How much does a Zahm gas meter cost?
$1,525.00 The Zahm SS-60 Volume Meter was developed to determine average CO² levels of gas in tank stored beverages. Its improved design over the older Zahm-Hartung Volume Meter (Series 2000) greatly improves accuracy and time required to run a test.
What does the Zahm SS-60 volume meter measure?
Loading… The Zahm SS-60 Volume Meter was developed to determine average CO² levels of gas in tank stored beverages. Its improved design over the older Zahm-Hartung Volume Meter (Series 2000) greatly improves accuracy and time required to run a test.
What is the SKU for CO2 testing?
SKU: 10001 Categories: CO² Purity Testing, Testing Equipment. The Purity Tester consists of a caustic reservoir and calibrated absorption burette mounted to a PVC polished frame.
