Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
Is 14mm the same as 9 16?
13mm = just over 1/2 inch. 14mm = almost 9/16 inch. 15mm = almost 19/32 inch. 16mm = 5/8 inch.
What diameter is 14mm?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 13mm | Little over 1/2 Inch | 0.51181 Inches |
| 14mm | 9/16 Inch | 0.55118 Inches |
| 15mm | Just short of 5/8 Inch | 0.59055 Inches |
| 16mm | 5/8 Inch | 0.62992 Inches |
What size bolt is a 14mm?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| M8 | 13mm | 13.30 |
| 1/4″BSW | 13.64 | |
| 14mm | 14.35 | |
| 3/8″UNF | 9/16″ | 14.63 |
What size socket is between 14mm and 15mm?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/4″ Drive | 1/2″ Drive |
|---|---|---|
| 12mm | 9mm | 15mm |
| 13mm | 10mm | 16mm |
| 14mm | 11mm | 17mm |
| 15mm | 12mm | 18mm |
Will a 9/16 socket fit a 14mm?
But thats no biggie ~ to answer your question, 9/16 SAE is actually 14.3 Metric, but it is the closest SAE size that will fit a 14mm metric head.
What is 14mm in fraction?
| Decimal | Fraction | Metric |
|---|---|---|
| 0.0394 | 14 mm | |
| 0.0625 | 1/16 | 14.29 mm |
| 0.0787 | 15 mm | |
| 0.0938 | 3/32 | 15.875 mm |
What is the metric equivalent of 1/4 inch?
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.250” | 1/4” | 6.35 mm |
| 0.313” | 5/16” | 7.95 mm |
| 0.375” | 3/8” | 9.53 mm |
| 0.438” | 7/16” | 11.13 mm |
How many MM is a quarter?
Coin Specifications
| Denomination | Cent | Quarter Dollar |
|---|---|---|
| Diameter | 0.750 in. 19.05 mm | 0.955 in. 24.26 mm |
| Thickness | 1.52 mm | 1.75 mm |
| Edge | Plain | Reeded |
| No. of Reeds | N/A | 119 |
What is the smallest 1/4 drive socket?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/4″ Drive | 1/2″ Drive |
|---|---|---|
| 8mm | 5.5mm | 11mm |
| 9mm | 6mm | 12mm |
| 10mm | 7mm | 13mm |
| 11mm | 8mm | 14mm |
What is a 1/2 drive socket used for?
1/2” Drives: Usually in use for more substantial jobs on vehicles where the nuts are more substantial and need more torque. You find them in use for 19mm socket size and above. While you have a large number of metric and SAE standard socket size, you can have differing wrenches to use these.
What is the equivalent of a 13mm socket?
What is equal to a 13mm socket? ‘ Well, 13mm equates to 0.512 inch so a 1/2″ would be tight, but 19mm is a better equivalent at 0.748″. There is definitely a difference between a 13mm and a 1/2″ wrench/socket.
What size sockets do metmetric sockets come in?
Metric Socket Sizes Chart 1/4” Drive 3/8” Drive 1/2” Drive 3/4” Drive 1” Drive 4mm 5.5mm 8mm 19mm 36mm 4.5mm 6mm 9mm 20mm 38mm 5mm 7mm 10mm 21mm 41mm 5.5mm 8mm 11mm 22mm 46mm
What size socket drive do I need for my job?
1/4” Drives: You find these used for low-torque work and are usually for smaller sized sockets possibly up to around 14mm as a maximum. 3/8” Drives: You find these as the most versatile as they can cover sockets to cover areas from jobs around the home to your car and many others.
