INTRODUCTION. LOCTITE EA 9394 AERO is a two-part structural paste adhesive, which cures at room temperature and possesses excellent strength to 350°F/177°C and higher. Its thixotropic nature and excellent high temperature compressive strength also make it ideal for potting, filling and liquid shim applications.
Who makes Loctite?
Loctite – Adhesives, Sealants & Surface Treatments – Henkel.
What is liquid shimming?
Abstract. Liquid shim is an epoxy-based paste commonly used to fill gaps encountered in composite assemblies, found for example in primary aircraft structures, allowing a better load transfer between mechanically fastened components.
What is shim adhesive?
Master Bond liquid shims are epoxy materials designed for composite bonding applications. They eliminate gaps between composite surfaces and offer high compressive strength properties. Their high compressive strength makes them particularly useful for gap elimination in composite bonding applications.
What is liquid shim?
Liquid shim is an epoxy-based paste commonly used to fill gaps encountered in composite assemblies, found for example in primary aircraft structures, allowing a better load transfer between mechanically fastened components.
Is Loctite 567 removable?
1. Clean all threads (bolt and nut) with Loctite ODC-Free Cleaner & Degreaser. If required, apply on all threads Loctite 7649 Primer or Loctite 7471 Primer.
What is the Young’s modulus of hysol ea-9394?
Ta~ble2 data shows that on initial loading Hysol EA-9394 has an average Young’s modulus of about 0.59x 10c psi and a Poisson’s ratio of 0.37. Initial yield stress increases with increasing strain rate from a=9250 psi at e=O.00003 S-lto 0=1 1,400 psi at G=O.003 S-l.
What is ea-9394 adhesive?
Dexter Corporation’s Hysol EA-9394 is an amine-cured epoxy paste adhesive with an aluminum powder filler. This adhesive combines high temperature performance with strength and toughness; it can be cured at room temperature.
What is the mix ratio of EA 9394?
Hysol EA 9394 is a thixotropic adhesive with structural properties to 177°C / 350°F. Volumetric mix ratio 4:1. Hysol EA 9394 is also used as a liquid shim. Hysol EA 9394 is a thixotropic adhesive with structural properties to 177°C / 350°F.
Is Loctite EA 9394 Aero MMM-A-132 Rev A Class 3?
LOCTITE EA 9394 AERO is qualified to MMM-A-132 Rev A, Type I, Class 3. The mechanical properties in this data sheet are also valid for LOCTITE EA 9394S AERO. LOCTITE EA 9394S AERO is only available in Semkits and differs from LOCTITE EA 9394 AERO as it has 1 part less thixotrope in Part B to aid packaging.
