International Standards IEC 60320 Though different country owns different power cord types and standards, the IEC 60320 is recognized as an international standard used by most countries in the world. The “C” represents the code standard for connectors made by IEC 60320.
What does IEC cable stand for?
The International Electrotechnical Commission
The International Electrotechnical Commission, commonly known as the IEC, is the world’s leading independent non-profit international standard-setting organisation for electrical, electronic and related technologies.
What uses C13 power cord?
Common uses for the C13 connector/C14 inlet include medical equipment, test equipment, and IT equipment, along with commercial appliances, some home appliances, data centers, power distribution devices, and professional food equipment, to name a few.
What are the differences between C13 & C14?
The difference is how many neutrons each has. Carbon-13 has 7 neutrons and C-14 has 8 neutrons.
What is C13 power connector?
C13 / C14. Very widely used for computers, monitors and older laptop power supplies. The IEC C13 connector is typically used on standard mains cables; the C14 connector is used on devices, power supplies and IEC extension cables.
What is the difference between C13 and C15?
One of the most apparent differences between the two connectors is the notch on C15 connector. Although C15 looks quite similar to C13, it has a little groove opposite the earth. The IEC-C15 connectors also work in the C14 outlets. But the IEC-C13 connectors do not fit in the C16 inlets.
Does it matter which power cable I use?
If you are referring to the 110 VAC power cord there is no problem as to which cord you use. However, the cables that connect from the PSU to the motherboard, devices, graphics card, etc. are not inter-changeable from one brand to another.
What is the difference between C13 and C19?
For example, the most common cable is the C13, which is used to power standard PCs and monitors. With today’s high-power applications, the C19 connector is becoming more common for use with servers and power distribution units (ePDU).
What is a C20 plug?
C20 Power Cord Plug Adapters IEC C20 plug adapters allow you to adapt any of the mating plug styles to the connectors below into an IEC C19 outlet. For example, the C20 to L6-30R plug adapter would allow you to convert a male L6-30P plug to a C20 so that it can be plugged into a C19 outlet on a power strip.
How do you use an IEC C13 cord?
Cords with a 90° elbow plug fit flush against a wall outlet, so they fit behind machinery or in areas where space is tight. Use cords with an IEC C13 socket for computers, lab equipment, and office machines. Cords with automatic GFCI reset immediately regain power after ground is established.
What is a C13 power cord used for?
IEC C14 to C13 cords are the most popular type of power cord used to power equipment in a data center server rack. Sometimes referred to as Jumper Cords, C14 to C13 cords are used to connect server and network equipment power supplies to a PDU or power strip.
What is the difference between IEC 320 C13/C14 and C14 connectors?
Most current versions of this plug have one blade slightly wider than the other. The IEC 320 C13/C14 connectors are based on standards created by the International Electrotechnical Commission, an international standards body. The “320” refers to the number of the specification that describes power connectors.
What is the mating connector for the C13 socket?
The mating connector for the C13 socket is the C14 plug, which is often mounted into a recessed panel or chassis on computer power supplies or power transformers. Shop IEC 320 C13/C14 IEC 320 C5
