The splines in the center of the clutch Disc mesh with the splines on the input shaft of the manual transmission. This makes the input shaft and Disc turn together. However, the Disc is free to slide back and forth on the shaft.
How long does clutch plates last on motorcycle?
Typically you can expect your a motorcycle clutch to last between 20 000 and 60 000 miles. A clutch that is often slipped in the friction zone and that is not properly maintained may need replacement after as little as 5 000 miles, while many riders do well over 100 000 miles on the original clutch.
Do I need to replace steel clutch plates?
If your clutch has been slipping for a while or you recently did a ton of drag racing or hill climbs, chances are that your steel plates need replacing, too. A few of our steel plates were showing that they were very hot at some point, but not so bad that they became warped, so these will be reused.
Why do you soak clutch plates in oil?
On another note, I called EBC today, and they suggest their heavy duty friction plates, which are made with a similar friction material as OEM (cork), be soaked for 20 minutes in engine oil. The reason for this is to prevent seizure to the steel plates during initial break in, as I reported earlier.
What type of oil do you soak clutch plates in?
engine oil
It’s ideal to soak the fiction plates in engine oil in advance of installation. If possible, place them in the oil the day before and let them soak overnight. If you need to, apply the oil directly to the plates to ensure that it is evenly coated on both sides of each plate.
What is single plate clutch?
A single plate clutch has one clutch plate. This clutch works on the principle of friction. It is the most common type of clutch used in motor vehicles. The clutch primarily consists of two members, one mounted on the driving shaft and the other on the driven shaft.
What are clutch plates made of?
Clutch plates are usually made of cast iron and high carbon steels. The properties of cast iron have high compressive strength, low tensile strength and no ductility.
How do I know if my clutch plate is bad?
8 Signs of a Bad Clutch
- Weak Acceleration.
- Grinding Gears.
- Loose Clutch Pedal.
- Sticky Clutch Pedal.
- Other Noises.
- Won’t Shift into Gear.
- Won’t Stay in Gear.
- Burning Smell.
How do I know if my clutch plate is bad on my motorcycle?
To tell if your motorcycle clutch is bad, you’ll need to look for signs such as unexplained high revs and lowered gas mileage. Other signs of a bad clutch may also include a stuck clutch lever, hard shifts accompanied by a clunking sound or jerk, and difficulty getting the motorcycle to shift gears.
How much is a motorcycle clutch replacement?
Like cars, motorcycles have a clutch for changing gears. Over time, the gears and other components will wear down, so you’ll need to replace them. On average, it costs about $600 to have a professional replace your motorcycle clutch. The typical price range is between $300 on the low end to $800 on the high end.
What do I need to change the clutch on my motorcycle?
For this job you will need an oil drain pan, repair manual, replacement clutch plates, new clutch springs, clutch cover gasket, motorcycle engine oil and some basic hand tools. A dial caliper is only needed if you intend to reuse any of the original clutch parts. If you are due for a new oil filter soon, now is a good time to change that, as well.
When should you replace your clutch plates?
There are at least five telltale signs that it is time to replace your plates. If your clutch is showing any warping, loss of thickness or your plates have been burned; then it is probably time to replace the stack. Therefore, you should gather the necessary tools and prepare the work area.
Do you have to remove judder spring for clutch plate?
Some replacement plate kits require you to remove the spring, so be sure to check with the manufacturer of the replacement clutch plates to see if your judder spring remains in place or gets removed. Our Suzuki has a thick friction plate against the innermost part of the clutch basket.
What side does the clutch go on a Suzuki motorcycle?
All bikes are a little different in the details — for example, some clutches are on the left side and some are on the right side — but this Suzuki is fairly typical. Once you’ve determined a slipping clutch is your problem, here are the steps to follow to replace your motorcycle’s clutch plates. Secure the motorcycle before starting work on it.
