Docker Alteroo

Home / updates

What is the code for Samsung TV on a universal remote?

Sarah Cherry |

Enter the TV code for Samsung : 0101, and keep trying with Samsung 4 digit and 5 digit remote code list below. The LED light will go off after the correct code is entered.

What is my Samsung TV code?

On qualifying 2019 Samsung Smart TVs, the model number can be checked by holding the Play/Pause button on the TV remote for more than seven (7) seconds. An “About This TV” screen will pop up, and the model number – called “Model Code” – will be shown under the “Product Information” section.

How do I find my TV 4 digit code?

Check the User’s Manual of your remote control to locate the code section. The list of codes for the remotes on the manual differs. Some of the codes are on the manual, while some are written on a piece of paper that comes with the manual. Locate the code and try it out to find the one that matches your Tv remote.

How do I connect my Samsung remote to my TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do you program a Samsung universal remote?

Press the Home button on your TV remote to access the Home Screen

  • Select Universal Remote on the Source screen.
  • Your TV and the remote will memorize the external device and its connection port (HDMI 1, HDMI 2, etc.) to make controlling everything even easier.
  • Occasionally, the device may not respond after it’s registered.

    • What are the universal remote codes for Samsung TV?

    These codes can be utilized with every universal remote if your remote needs a 3, 4, or 5 digit code and it is a very simple process to use these on your Samsung Tv. You just need to give the try on the universal Samsung tv remote codes once. 0112, 0309, 0209, 0512, 0302, 0502, 0002, 0102, 0110, 0818, 0895, 0437, 0802, 0103, 0609, 0012, 0212

    What is the Comcast remote code for Samsung?

    Taken from the Comcast Custom DVR 3-Device universal remote manual, the codes for Samsung LCD televisions are 10812, 10766 and 10814. The codes for all other Samsung televisions are 10060, 10812, 10702, 10179, 10030, 10766, 10814, 11060 and 11903.

    How to program Universal TV remote control?

    First you need to “Turn The Device On”

  • Press the “TV” on your “Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  • Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure,just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

    • You Might Also Like