The default username for first time configuration is admin, no password is required.
How do I log into my HP ProCurve switch?
Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.
How do I reset my HP ProCurve password?
If you lose or have forgotten a switch password: Solution: You can clear the switch password by pressing the recessed Clear button on the front of the switch. This action deletes all password and user name protection from all of the switch’s interfaces.
How do I factory reset my HP ProCurve 2626?
Factory Reset When enabled, the switch can be reset to factory defaults by depressing the “Clear” and “Reset” buttons together, releasing the “Reset” button while holding the “Clear” button down, and releasing the “Clear” button as soon as the “Test” light begins to flash rapidly.
How do I reset my HP 1920 switch password?
To reset the password you will need to connect a console cable (38400/8/N/1), reboot the switch, then press Ctrl + B during boot up (similar to Cisco ROMMON). You will then have an option to boot the switch without a configuration, which will also have no password.
What is the default password for HP printer admin?
Open a web browser and type the printer IP address in the address field exactly as it appears on the Configuration Page, and then press Enter. Click the Security tab, and under General Security, set the local administrator password. Keep the username default as admin. Type the New Password and Verify Password.
How do I assign an IP address to my HP ProCurve switch?
HP Procurve Switch # [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network. [Tab] to the Subnet Mask field and enter the subnet mask used for your network.
How do I reset my ProCurve switch to factory settings?
To execute the factory default reset on the switch, perform these steps:
- Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
- Continue to press the Clear button while releasing the Reset button.
- When the Self Test LED begins to blink, release the Clear button.
How do I reset my HP ProCurve 2510 to factory settings?
How to reset a ProCurve 2510-24g to default settings
- Press in both the Clear and Reset buttons (tiny buttons on the left edge)
- Release the Reset button after the port lights come on (~2 seconds)
- When the Self-Test LED starts flashing (to the left of the Clear and Reset buttons), release the Clear button.
How do I reset my HP ProCurve Switch to factory default?
How do I reset my HP Procurve switch to factory default?
What is the default username and password for HP ProCurve 2650?
Default for HP Procurve 2650 is no user names or passwords set. You should be able to reset the passwords without killing your port configurations: and holding the Clear button for a minimum of one second.
Where can I find the HP ProCurve switch 2600 series management and Configuration Guide?
Switch 2600 Series Switch 2600-PWR Series Switch 2800 Series Switch 4100 Series Switch 6108 Management and Configuration Guide HP ProCurve Switch 2600 Series Switch 2600-PWR Series Switch 2800 Series Switch 4100gl Series Switch 6108 Management and Configuration Guide
Does ProCurve j9021a require user name and password?
I am prompted again for user name and password. the title of the window is “authentication required”. The server 192.168.1.55:80 at procurve J9021A requires a user name and password. I get this from IE and Chrome.
How do I add a password to a 2610-24?
A 2610 would have shipped with no password enabled and it would go straight into Manager (Enabled) mode via the console port. You add a named account in via “password manager user-name [name]” in a config context from looking at a 2610-24 I have. I would telnet/SSH into the switch and see if you can grab the config and then reboot it.
