100 meters
The standard allows chip manufacturers to develop and introduce compliant and interoperable devices, providing connections with the bandwidth of 10 Gbit/s and a maximum transmission distance up to 100 meters over the unshielded or shielded twisted pair cables.
What is the range of an LR SFP?
Comparison: SFP-10G-SR vs SFP-10G-LR vs SFP-10G-LRM
| SFP-10G-SR | SFP-10G-LR | |
|---|---|---|
| Package Type | SFP+ | SFP+ |
| Rate | 10 Gbps | 10 Gbps |
| Wavelength | 850nm | 1310nm |
| Max. Distance | 300m/400m | 10km |
How far can you run a 10GBASE-T cable rated at Cat6a?
and 55 meters
Cat6 Ethernet cable supports 10GBASE-T over a distance only between 37 and 55 meters depending on the alien crosstalk environment.
Can you run 10gb over Cat6?
Cat6 wiring can support up to 10 Gbps and frequencies of up to 250 MHz. Cat6 cables also sport thicker sheaths in comparison to Cat5e. Though standard Ethernet supports distances of up to 100 meters, CAT6 cable only supports 37-55 meters (depending on crosstalk) when transmitting 10 Gbps speeds.
What does 10GBASE-er mean?
10GBase-ER ER means Extended Reach, Basically, these are just extremely long-range fiber variations. 10GBASE-ER has a reach of 40 kilometers over-engineered links and 30 km over standard links. Due to the laser power, attenuation is required for links less than 20km long.
What 10GBASE-ER?
10GBASE-ER is the only standard which can support 10 Gbps Ethernet connectivity over the maximum distance of 20 km. as already discussed 10GBASE-ZR can achieve 80 km but that is not an IEEE 802.3as standard.
Is 10GBASE-LR single mode or multimode?
10GBASE-LR vs 1000BASE-LX: What’s the Difference?
| 10GBASE-LR SFP | 1000BASE-LX SFP | |
|---|---|---|
| Interface | LC duplex | LC duplex |
| Fiber Type | Single mode | Single mode and multimode |
| Wavelength | 1310 nm | 1270-1355 nm |
| Transmission Distance | 10 km | 5-10 km over single mode fiber; 550 m over multimode fiber |
Can I run 10Gb over Cat6?
What is 10GBASE-LRM and how far can it reach?
10GBASE-LRM allows distances up to 220 metres (720 ft) on FDDI-grade multi-mode fiber and the same 220m maximum reach on OM1, OM2 and OM3 fiber types. 10GBASE-LRM reach is not quite as far as the older 10GBASE-LX4 standard.
What is the link length of the Cisco 10GBASE-ZR module?
The Cisco 10GBASE-ZR module supports link lengths of up to about 80 kilometers on standard SMF (G.652). This interface is not specified as part of the 10 Gigabit Ethernet standards and is, instead, built according to Cisco specifications.
What is the difference between Cisco sfp-10g-lr-X and Cisco 10GBASE-LR module?
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652). The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652).
What is the link length of 10Gbase SFP+ modules?
Cisco 10GBASE SFP+ Modules Data Sheet. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz * km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz * km MMF (OM4), up to 400m link lengths are possible.
