For one-piece spindle nut systems, torque the nut to a minimum of 300 ft-lbs. Do not back off the spindle nut. Engage any locking device that is part of the spindle nut system. If the locking device cannot be engaged when the nut is at 300 ft-lbs, advance the nut until engagement takes place and the nut is locked.
What size is the axle nut on a Pontiac Grand Prix?
Dorman – Autograde – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No. 615-095)
What size is the axle nut on a 2001 Pontiac Grand Prix?
5 Answers. The axle nut is 36mm. The three bolts are 1/2″ – 13mm.
What size are axle nuts?
A Must Have for Front End Work This 36mm axle nut socket is extra deep to fit various axle lengths and can be used to remove or install axle nuts on front wheel drive vehicles.
How tight should an axle nut be?
The nut on the spindle should be tightened until snug, with no side-to-side play in the hub and then backed off slightly, about maybe a 1/8 of a turn.
Should I torque axle nut?
Proper torque secures the axle nut and keeps the proper load on the hub assembly. Second, the proper torque keeps the correct load on a hub assembly needed for longer bearing life. Torque specifications can be different, even for the same hub, if it’s multiple applications.
What size is the axle nut on a 02 Grand Prix?
The axle nuts on my 98 GT, 01 GT and 02 GTP are all 34mm.
What size is the front axle nut 2006 Grand Prix?
36mm, if you’re replacing the wheel bearing you need to clean the axle threads, lube them and torque a NEW nut to spec.
What size is the axle nut on a 02 Pontiac Grand Prix?
What size is the axle nut on a 2006 Pontiac Grand Prix?
36mm, if you’re replacing the wheel bearing you need to clean the axle threads, lube them and torque a NEW nut to spec. torque.
How do you measure axle nut size?
Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut.
What size is a trailer axle nut?
1″ –
This is 1″ – 14 thread standard castle nut that will work on nearly all trailer axles. This size and thread is very standard. The Castle style is used with both Cotter Pins and Tang Washers to secure your assembly effectively.
