1998
In 1998, the first BERNINA computerized sewing machine, the artista 180 was introduced. This was the first sewing machine to have machine embroidery capabilities, bringing with it so many wonderful and new creative possibilities.
Why does my Bernina Sewing Machine keep jamming?
The reason for the problem could be lint, dust and other debris getting stuck in their mechanism. The solution: Stop work, lift the presser foot and thoroughly clean the fee dogs from any debris. Also, make sure that they are lifted up in a raised position allowing for a proper grip of the fabric.
Why is my thread getting tangled in the bobbin?
If your sewing machine thread is not properly threaded, the bobbin thread won’t be pulled up into the fabric the way it needs to be. Occasionally the upper thread can catch on a moving part or get stuck, which impedes the easy flow of thread through the needle, creating a tangle.
Why does my thread keep bunching up underneath?
Your Thread Tension Is Too Tight Sewing machine manufacturers suggest that you don’t mess with your bobbin thread tension too much, but you should adjust your upper thread tension if you keep getting bunched up thread underneath your fabric. If your tension is too tight, it can pull your thread and break it.
How do I know if my sewing machine timing is off?
If your hook tip is passing through or below the needle eye, then the timing of the sewing machine is off. On the other hand, if the hook tip is passing above the needle eye, but extends past the needle more than a couple of millimeters when the needle eye meets the radius of the hook, then the timing is also off.
What causes sewing machine timing problems?
The hooks are the most common issue concerning sewing machine’s timing. The second most common issue is related to the needle. The first step is to check the sewing machine’s timing to make sure that there is a problem. If the hook is turning clockwise, the needle must be moved to the far right.
Why is the tension wrong on my sewing machine?
Needles, threads, and fabrics: Different thread sizes and types on top and in the bobbin can throw off basic tension settings. A needle that’s too large or small for the thread can also unbalance your stitches, because the size of the hole adds to or reduces the total top tension.
What to do if your Bernina 780 won’t turn on?
Check the thread spool you are using to see if the thread is old or dried out. The latter issue may create a lot more fuzz than the machine can handle at one time. If you have a Bernina 780 and it won’t turn on, just turn the machine off again and wait for about 3 hours. This should reset the electronic parts inside.
Why is my artista 180 stuck in the reverse position?
For the Artista 180 it is possible that the directional lever got stuck in the reverse position. All you have to do is to loosen the lever by unscrewing it and moving it to the forward position. A too-tight hold may keep the machine from switching gears.
What are some common problems with a Bernina Sewing Machine?
Just remember how the parts go back on so you have no reassembly problems. Some common Bernina sewing machine problems have already been discussed here. Those would be the loose connections and plugs as well as the needle placement, look and tightness. Not to forget the tension problem.
How to fix a Bernina 1230 machine that won’t switch gears?
All you have to do is to loosen the lever by unscrewing it and moving it to the forward position. A too-tight hold may keep the machine from switching gears. The Bernina 1230 has a reverse button and it too can be put together too tightly to switch gears. To access the reverse button you need to remove the head frame and the circuit board.
