Any competent person can install an isolator switch, but it does require the main fuse to be pulled in some cases, unless the meter is one of the few that includes a built in isolator (in which case it’s questionable as to whether it’s worth fitting a second one).
What is a double pole isolator?
A double pole isolator or 2 pole isolator switch is installed to allow a specific appliance or circuit to be powered down so that testing, maintenance and servicing can be carried out safely. They are normally used for high power fixed wiring appliances such as cookers, electric showers and fire alarm boxes.
What is a meter isolation switch?
An isolator switch can be fitted between your meter and fuse board, allowing connection or disconnection of your electricity supply without the need of a Distribution Network Operator, and ensuring the circuit is safe and de-energised to allow maintenance work to take place.
How much does it cost to install an isolation switch?
The cost of the installation is £120. This is reduced to £60 if you’re having a smart meter installed at the same time. To book an isolator switch installation, or a combined isolator switch and smart meter installation, contact us.
Can an electrician fit an isolator switch?
An isolation switch is designed to act as a circuit breaker on the mains electrical supply, so that any electrical work that needs to take place within a property can be completed safely by a private electrician.
How does a double pole isolator work?
Double pole isolator switches further have mechanical switches which are coupled together and represent both the live and neutral legs of the connection. As such, they completely shut down the circuit and isolate it from the main power source. This points to the fact that both the live and neutral wires are deadened.
What is an all pole isolating switch?
Description: disconnects both sides of the fusing using two double break contacts per pole. This insures complete isolation of the fuse in the “Off” position. Touch safe design: All switches are designed to reduce the danger of accidental contact with live, energized parts. All. Current Rating: 30 amps.
What is 3 pole isolator switch?
3 phase isolator switches are a type of fused switch disconnector mechanism. As the name suggests, these switch devices help to ensure that electrical systems and circuits are completely and safely powered down. They do so by isolating (i.e. cutting off the power supply to) a particular part of the circuit in question.
Do I need a cu isolator?
If your consumer unit is adequate and has spare slots, there would be no need for an isolator, however as any new work means the installer takes some responsibility for the CU, it’s understandable why some won’t want to touch it and prefer to tap into the tails.
How much does it cost to fit an isolating switch?
Very wise, get edf to do it. You can but ask! The level of service and co-operation from different Network operators and electricity suppliers varies enormously. Western power (network op. in the south west) will fit an isolating switch for about £35 – definately a bargain.
Do I need to fit this isolator before a smart meter?
Yes ” Needed to fit this isolator before having a smart meter fitted.3mm Allan Key needed for cover removal & takes 25mm tails easily,quite compact unit…just right for mounting on board & made by wylex so quality component. ” 3 of 3 people found this review helpful.
What is the IP rating of the enclosure for the Rec switch?
Hello. The IP rating of the enclosure is IP3XC. However, what is the IP rating of the meter cabinet into which you wish to include the REC switch?. Please ensure a competent qualified electrician answers this question and of course carry out any installation work required. Thank you for your interest in our Wylex brand.
