A push/pull throttle cable is an upgrade to the old standard single throttle cable linkage. The throttle grip works on the carburettors when twisting/throttling up and when releasing/throttling down. The second cable pulls the carb closed so it isn’t stuck wide open.
How do I make my clutch cable longer?
To lengthen your cable, start by shortening the sheath using the adjuster at the top end. You can likely adjust the first end with just your hand by turning the adjuster near your bike’s lever. Simply turn the adjuster to extend the length of your bike’s clutch cable and create additional slack.
Can you extend a clutch cable?
No more need to replace the clutch cable on your motorcycle. The NEW EZ Install Clutch Cable Extension installs in minutes without removing the exhaust and draining the tranny oil. The 4″ Clutch Cable Extension is for 2021 Touring Models.
How much play should throttle have?
Most motorcycle manufacturers recommend about 2 to 3 millimeters of throttle free play, but over time the cables will stretch and settle into their housings and you’ll end up with more slack.
What are the different length options available on a cable?
Cables are available in stock and extended lengths with some up to plus 12″. Available with smooth (1996+) or threaded (1995 and older) tips. 90°, 70°, or 45° bend options.
Do I need special cables for my bike?
You need cables for a vehicle on which we have no documented information about the specifications of the stock cables. This can be the case for older Japanese machines, most European street models like Ducati’s, BMW’S and Moto Guzzi’s, motor scooters, and rare or exotic bikes.
Do you need a throttle cable for a motorcycle?
This can be the case for older Japanese machines, most European street models like Ducati’s, BMW’S and Moto Guzzi’s, motor scooters, and rare or exotic bikes. You need a throttle cable for a vehicle that has non-stock components such as the throttle (twist throttle or thumb throttle), carburetor, or FI throttle body.
What’s in the burly cable kit for my Dyna?
This Burly Cable Kit is setup for the 2016-2017 Low Rider S with T-Bars. Includes everything you’ll need to setup your new bars. Kits include correct length clutch cable, throttle/idle cables, brake lines, wire extensions and necessary hardware Brake… Grab a new T-Bar Burly Cable Kit for your Dyna.
